Dometic Single Zone LCD Thermostat and Control Kit

• Cool, Furnace & Heat Strip Only (Picture displays Heat Pump function)
• Large LCD display makes it easy to see and use in low light levels.
• Seven segment LCD numbers and letters improve viewing.
• Green LED indicator shows operating mode.
• Easy touch click response buttons let you know when you make a change on the control panel.
• Displays set temperature actual temperature displayed on demand.
• Efficient three-speed fan (high, low, auto) for interior comfort.
• Fahrenheit or Celsius temperature display.
• Digital temperature calibration maintains room temperature +/- 2.
• Auto fan will vary to maintain even room temperature.
• Memory retention in case of power loss unit returns to previous set points.
• 2.5 lbs
• White in Color
  

Features:

• Three wire connector.
• Factory set default temperatures:
• Heating 68F/20C.
• Cooling 72F/22C.
• Furnace mode lets user select 1/ 2 on/off differential.
• Open back for pull through wiring.
• Back plate with two screws.
• Snap in display cover.
• 12V DC supply.
• System diagnostics displayed on demand.
• Single Zone LCD Thermostat easily functions up to 75-feet away from the air
  conditioner/heat pump.
• Built-in temperature sensor.

Important:

• This thermostat is generally specific to the appliance it is being used with and is not universal.
• Please do not use with any other application other than that which is specified in the installation and operating instructions.
• If replacing analog thermostat you must replace the control box and thermostat